EQUIPMENT ASSESSMENTS · SKAGIT COUNTY
Know what you own before it fails.
Age, tested condition and remaining life for every furnace, heat pump, water heater, fireplace and appliance — measured on site with third-party instruments and written up in a report you can plan a budget around.
Owner-operated
Tenant contacted same day
measureQuick Pro reports
WA registered & insured
On every job
Your approval limit is respected
Anything over it waits for your OK.
Tenant scheduling handled
We coordinate access with the occupant.
Before-and-after photos
Proof of work to forward to the owner.
Itemized invoice
Line by line, with notes. No mystery charges.
OUR STANDARD
Tested, not guessed.
Nobody should estimate a furnace’s condition from the hallway. Every piece of equipment we assess is tested on site by a professional, using independent third-party instruments — and the readings go in your report.
Measured
Combustion analyzers, CO monitors, manometers and meters — logged live in measureQuick.
Verified
Checked against the manufacturer’s rated specs by a working professional.
Documented
Readings, rating-plate photos and dates — proof you can hand to anyone.
PACKAGES
Pick the report that fits the job.
Every package includes rating-plate photos, measured readings and a plain-English recommendation for each item — repair, budget for replacement, or leave it alone.
FOR MANAGERS & INVESTORS
Full Equipment Assessment
Every furnace, heat pump, water heater, fireplace and appliance — tested, rated and given a remaining-life estimate. HVAC scored in measureQuick. Built for capital planning and pre-purchase due diligence.
$225 per property
FOR REAL ESTATE AGENTS
Listing Equipment Sheet
One page per listing: the age and tested condition of the furnace, water heater, appliances and fireplace. Answer buyers’ questions before the inspection raises them.
$175 per listing
FOR LANDLORDS
CO & Smoke Alarm Safety Check
Professional CO monitoring at every fuel-burning appliance, plus alarms tested, replaced or installed where required. A dated record for your files at every turnover.
$95 per unit · alarms extra
Equipment Condition Report
[Example property address] · Assessed [date]
SAMPLE — EXAMPLE VALUES
Equipment
Mfg. year · age
Measured readings
Condition
Est. remaining life
Recommendation
Gas furnace — 80% AFUE
2009 · 17 yrs (serial)
Temp rise 52°F (rated 35–65) · Flue CO 38 ppm · Static 0.62 in. w.c.
Fair
1–4 yrs
Clean & tune now; budget replacement
Water heater — 50 gal gas
2014 · 12 yrs (serial)
Outlet 128°F · T&P valve operates · Corrosion at fittings
Poor
0–2 yrs
Plan replacement this year
Heat pump — 3-ton split
2019 · 7 yrs (serial)
Compressor 9.8 A (RLA 12.2) · Supply/return ΔT 19°F
Good
8+ yrs
Routine maintenance
Gas fireplace insert
2006 · 20 yrs (rating plate)
Room CO 0 ppm · Inlet gas 7.0 in. w.c. · Glass gasket worn
Fair
Monitor
Replace gasket; annual service
Refrigerator — 18 cu ft
2016 · 10 yrs (serial)
Fresh 37°F · Freezer 1°F · Door gaskets seal
Good
3–6 yrs
No action
Tested on site with independent third-party instruments and recorded in measureQuick: [analyzer make/model, calibrated date]. Each item includes rating-plate and condition photos. This is an equipment condition assessment, not a licensed home inspection.
MEASUREQUICK PRO REPORTS
HVAC tested by the numbers.
Every furnace, heat pump and A/C we test runs through measureQuick — the commissioning platform HVAC pros use to read live instrument data and score a system against real conditions. You get a branded report with readings, photos and a plain-English summary. (Sample reports are measureQuick’s own examples.)
Live instrument readings
Works with 80+ pro instruments — Fieldpiece, Testo, NAVAC and more. Readings flow straight into the report.
Vitals score
A 0–100 system score with a clear pass or fail, checked against conditions on test day. See how the score works →
Airflow and pressure
Static pressure and airflow measured, so a struggling system is caught before the tenant calls.
Photos and video
Rating plates, filters and problem spots documented right in the report.
Plain-English summary
What we found and what it means — written for owners and managers, not just techs.
Ready before we leave
The report is in your inbox the same day, ready to forward to the owner or attach to a listing.
SEASONAL · BOOK SEPTEMBER–NOVEMBER
Fall Heating Safety Check
Before the first cold snap, every heat source in the unit gets tested — so the first no-heat call of the season isn’t yours.
Furnace or heat pump start-up & test
Combustion & CO readings
Gas fireplace & insert check
Filter change
CO & smoke alarms tested
Dryer vent airflow
Water heater temp & T&P valve
Hose bibs & freeze prep
Book a fall check
$149 per unit · multi-unit scheduling in route order
Get on the list once
We’ll reach out every fall to schedule your properties, in route order, before the busy season hits.
Every check includes a measureQuick report with a Vitals score.
WHY TOWER
The person you call is the person who shows up.
No call center, no rotating crews, no chasing a dispatcher for an update. Tower is owner-operated, so you get the same standard on every unit.
Clear communication
You hear when we’re scheduled, when we’re on site and when we’re done.
No surprise costs
Work stays inside your approval limit. Anything more gets a call first.
Respect for tenants
On time, courteous, and the unit left cleaner than we found it.
Records you can use
Photos and notes for owner reports, deposit disputes and your files.
Common questions
How do you know how old equipment is?
Most manufacturers encode the build date in the serial number. We decode it, photograph the rating plate, then measure how the unit is actually running.
Is an assessment the same as a home inspection?
No. It’s a focused condition assessment of mechanical equipment and appliances. It works alongside a licensed home inspection but doesn’t replace one.
Do you do plumbing and electrical?
Yes — everyday repairs like faucets, toilets, drains, fixtures, outlets and fans. If a job needs a permit or a specialty license, we’ll tell you up front and make sure it’s handled the right way.
What is measureQuick?
A commissioning platform HVAC pros use. Our test instruments connect to it by Bluetooth, it checks the readings against live conditions and scores the system 0–100 with a pass or fail. You get the branded report with photos and a plain-English summary.
How do you price work?
An $80 trip charge covers the visit and the first 30 minutes. After that, each item is priced at fair market value — not by the hour. Larger jobs get a written quote first, and every job ends with an itemized invoice and photos.
How fast can you get out?
Routine requests are usually scheduled within a few business days, and urgent issues — active leaks, no heat, safety problems — go to the front of the line at the urgent rate. Tell us your move-in or closing date and we’ll plan around it.
REQUEST WORK
Submit a work order
Include the property address, tenant name and phone, the issue, photos if you have them, and your approval limit (NTE) — we’ll take it from there. You’ll hear back the same business day.
Prefer to talk it through? Call or text (360) 770-5391.
Scheduled maintenance and repairs — not a 24/7 emergency service. For active leaks or no heat, call.